Which ROC SE flocked built-in-control model do I need for my sauna room?

The series is rated 2.2–8 kW: SE2 (2.2 kW), SE45 (4.5 kW), SE6 (6.6 kW) and SE8 (8.0 kW). Room-volume ratings are being confirmed, so send us your room dimensions and wall material and we will recommend the model.

Do I need a separate controller for the ROC SE flocked built-in-control heater?

No. The timer and thermostat are built into the heater itself, so only the power supply is wired in. Choose the external-control version if you want the panel outside the room.

Can the ROC SE flocked built-in-control heater be supplied under our own brand, and is it UL certified?

Yes. It is an ROC own-brand product built for OEM and ODM supply, with your badge, colour and packaging. CE marking is standard; UL certification for North America can be arranged on request and the cost is quoted per project.

Flocked Panel Sauna Heater | ROC SE Built-in Control

ROC SE Flocked-Panel Sauna Heater (Built-in Control)

The SE has a soft, dark flocked finish on its side panels that stays cooler to the touch than bare metal and hides fingerprints. Timer and thermostat are built into the heater. SE2 and SE45 are compact wall units; SE6 and SE8 are the full-size version. Timer and thermostat are built into the heater, so no separate control unit is needed. Casing: dark flocked steel panels.

Power ratings: SE2 (2.2 kW), SE45 (4.5 kW), SE6 (6.6 kW) and SE8 (8.0 kW). Room-volume ratings for this series are being confirmed; send us your room dimensions and wall material and we will size the heater for you.

All ROC heaters run on 220–240 V single-phase or 380–415 V three-phase supply and are CE marked as standard; UL certification for North America can be arranged on request, with the cost quoted per project. The SE flocked built-in-control heater is an ROC own-brand product and can be supplied under your brand through our OEM and ODM service. See the full ROC Flocked-Panel Heaters range. Typical use: home saunas and small cabins that want a warm, matt finish.

CE Certified

OEM Available

Global Shipping

Specification	SE2	SE45	SE6	SE8
Model	SE2	SE45	SE6	SE8
Power (KW)	2.2	4.5	6.6	8.0
Voltage	220–240 V 1N~ / 380–415 V 3N~	220–240 V 1N~ / 380–415 V 3N~	220–240 V 1N~ / 380–415 V 3N~	220–240 V 1N~ / 380–415 V 3N~
Control	Built-in controls	Built-in controls	Built-in controls	Built-in controls
Dimensions (mm)	310 × 170 × 400	310 × 170 × 400	455 × 315 × 435	455 × 315 × 435

Specification

SE2

SE45

SE6

SE8

Model

SE2

SE45

SE6

SE8

Power (KW)

2.2