Sauna Insights
Expert guides on sauna heaters, timber selection, certifications and sourcing strategies -- everything you need to make informed decisions for your next project.
Commercial Sauna Floor & Drainage: Waterproofing, Slope, Materials
Water is the one thing a commercial sauna floor has to manage all day, every day — and it's the one thing most floors are built to ignore. Bathers drip, stones throw off steam, condensation runs down the walls, and staff hose the room down between sessions. All of that water ends up on the […]
Read More
Sauna Heater Replacement Guide: Repair, Replace or Retrofit?
An aging sauna rarely needs to be torn out and rebuilt. The room's frame, benches, and shell often have years of life left — it's the "heart" of the sauna (the heater and its control unit) and the "skin" (the timber lining) that wear out first. The problem is knowing how far to go. Do […]
Read More
Commercial Sauna Heater Repair & Troubleshooting: Why It Won’t Heat
For a hotel, spa, or gym, a sauna that won't heat isn't just an annoyance — it's a room that's losing revenue every hour it stays closed. But before you call out a repair technician or, worse, order a whole new heater, it pays to understand what has actually failed. Many "faults" are simple resets […]
Read More
Sauna Insulation and Vapor Barrier Guide for Commercial Projects
When a commercial sauna takes forever to heat, runs the heater non-stop, or shows mould and rot within a few years, the cause is almost never the heater. It's the wall. Insulation and the vapor barrier are the two layers that decide whether a sauna reaches temperature quickly, holds it efficiently, and survives years of […]
Read More
Commercial Sauna Electrical Requirements: Power, Wiring and Safety Guide
Before a commercial sauna heater ever gets switched on, the building has to supply it correctly. Under-sized cable, the wrong phase, or a missing safety device does not just fail inspection — it can damage the heater or create a real hazard. This guide covers what hotels, spas, and project contractors need to know about […]
Read More
How Do You Choose the Right Wood for a Sauna Room?
You pick the right stove, but the wrong wood. The sauna still fails: warping, resin bleed, burned skin, harsh smell. Choose sauna wood by matching type to use. Red cedar suits high-end dry saunas[^1], hemlock fits infrared rooms, spruce serves Finnish tradition, and aspen works for sensitive users. But board thickness, moisture level, and grade […]
Read More
How Do You Choose Sauna Stones: Material, Size, Stacking, and Replacement?
The heater only makes heat. The steam comes from the stones. Pick the wrong stones and they crack, fly, or burn out your heating element—then the warranty is void.[^1] Choose certified sauna stones like olivine diabase, sized 5–10 cm, with split faces. Wash them, stack big at the bottom and small on top, leave air […]
Read More
How Should You Design Sauna Ventilation for Perfect Heat and Airflow?
Your sauna feels stuffy. The heat sits at your head while your feet stay cold. The wood starts to rot too soon. Bad ventilation is the hidden cause. Good sauna ventilation follows one rule: natural airflow goes "low in, high out," while mechanical airflow goes "high in, low out."[^1] The intake links to the stove, […]
Read More
How Do You Match Sauna Room Volume to Heater Power?
Why does heater selection start with room volume? Because a sauna heater is sized to the cubic volume of the room it must heat, not its floor area[^1]. If the heater is too small it will never reach or hold temperature; too large and it wastes energy and overheats the space. That is why every […]
Read More